RP114x Datasheet | RICOH

RP114x SERIES 300m A LDO REGULATOR NO. EA-236-141222 OUTLINE The RP114x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting output voltage, a short current limit circuit, a chip enable circuit, and so on. RP114x Features a minimum input voltage from 1.4V and the output voltage, which can be set from 0.8V to 3.6V (in 0.1V step). The output voltage of these ICs is internally fixed. These ICs perform with low dropout voltage due to built-in transistor with low ON resistance. Low supply current and a chip enable function prolong the battery life of each system. The ripple rejection, line transient response and load transient response of the RP114x Series are excellent, thus these ICs are very suitable for the power supply for hand-held munication equipment. Since the packages for these ICs are DFN(PLP)1010-4, SC-88A, SOT-23-5, therefore high density mounting of the ICs on boards is possible. Features - Supply Current .............................................................Typ. 50µA - Standby Current ...........................................................Typ. 0.1µA - Input Voltage Range.....................................................1.4V to 5.25V - Output Voltage Range..................................................0.8V to 3.6V (0.1V steps) (For other voltages, please refer to Mark Specification Table). - Output Voltage Accuracy..............................................±1.0% (VSET>2.0V, Topt=25°C) - Temperature-Drift Coefficient of Output Voltage ..........Typ. ±80ppm/°C - Dropout Voltage............................................................Typ. 0.25V (IOUT=300m A, VSET=2.8V) - Ripple Rejection ...........................................................Typ. 75d B (f=1k Hz) - Line Regulation ........................................................